reference beam造句
例句与造句
- The signal beam can be recreated by illuminating the medium with a beam identical to the original reference beam
通过用和原始参考光相同的光束来照亮感光介质可以还原信号光。 - This “ signal beam ” then meets a separate reference beam , and where the two beams intersect they create an interference pattern in a light - sensitive medium
然后，信号光会和另一独立的参考光相遇，当两个光束相交时，它们会在感光介质中制造一个干涉图样。 - The reference beam comes from the object wave itself and image of the object is formed by a lens on the plane of the holographic plate , therefore the hologram is named self reference image hologram
用透镜将物体的像成在记录干板平面附近，参考光来自物光本身，因此称之为自参考像全息图。 - This chapter introduces one technique which based on encrypting the access of storage data , this can be done by coding the phase of reference beams by use of orthogonal - phase - code
介绍了一种基于对接入加密数据通道进行加密的方法，即对参考光的相位进行正交相位编码； 4 .双随机相位编码加密光存储。 - This method doesn ’ t need beam deflection device and can change the reference beam incidence angle with mechanical movement platform only . and the accuracy of system is not getting lower
这种方法不需要光束偏转器件,只需要机械运动平台,仅通过平台的移动,就可以实现参考光束入射角度的变化,而且寻址的精确性并未降低。 - It's difficult to find reference beam in a sentence. 用reference beam造句挺难的
- We also store several images on the same spot with reference beams of different directions ( peristeophic multiplexing ) , when each hologram is separated by 15 , the crosstalk noise decreases greatly , the storage density can be obtained 10 bits / cm finally
我们还进行了在光刻胶上的旋转复用存储实验，在15度的角度下，复用的图像的交叉干扰大大降低。实际的存储密度达到10 ~ 7bits cm ~ 2 。 - During adjusting beam paths , the co - beam , a combination of the measuring beam and the reference beam , is not restricted to being perpendicu lar to the light sensitive surface of the object , but keeping the measuring beam and the reference beam co - axial proved to be crucial
在光路调整中，它对测量光与参考光的合光光束是否垂直于探测器光敏面要求不高，但对两光束合光同轴度则有严格要求。 - In order to investigate the phenomenon that holograms tend to be deteriorated on baing recorded in photopolymers with shrinkage , a fourier hologram is taken with slant gratings formed by the reference beam and object beams of different space - frequency
摘要为了分析光致聚合材料记录的谱面全息图在再现过程中发生“擦除”现象，将谱面全息图看作由不同角谱的物光与参考光在光致聚合材料内形成的不同倾斜角度的光栅总和。 - Based on the test of the flexural performance of reinforced concrete beams strengthened with aramid fiber reinforced plastics ( afrp ) and reference beams , this paper analyzes the failure process and characteristics of the strengthened beams and factors that affect the failure of the strengthened beams
摘要本文根据芳纶纤维加固钢筋混凝土梁和未加固的混凝土参考梁的抗弯性能静载试验研究，分析了芳纶纤维加固钢筋混凝土受弯构件的破坏过程，研究了加固后钢筋混凝土受弯构件正截面的破坏特征、受力特点及影响因素（粘贴层数和配筋率） 。 - Therefore , the three fundamentals required to obtain high precise measurements are : 1 ) frequency stability and frequency difference stability of the double - frequency laser source as well as the stable equivalent length of bore ; 2 ) the measuring beam and the reference beam are placed very co - axially ; 3 ) capability of recording the sub - division of the period of phase change and a reversible counter system
因而干涉仪系统达到高精度的基础是：频率及频差稳定的双频激光源、稳定的等效腔长；测量光与参考光合光后有很高同轴度的光路结构；能可靠记录相位差变化周期数的细分及可逆计数系统三部分。 - Furthermore , three fourier storage schemes were proposed for practical anti - counterfeiting : ( 1 ) store black - white digital images with hidden information made by image coding method , ( 2 ) store several images on the same spot with reference beams of different directions ( peristeophic multiplexing ) , ( 3 ) store a serious of given images recorded closely ( space multiplexing ) . three different fourier holograms were recorded on photoresist plates following the above three schemes using the optimized recording conditions obtained in the first part of this study work . the reconstructed images form the holograms showed some special anti - counterfeit effects
此外，本课题还研究了傅里叶全息存储在防伪上的实际应用，提出了三种防伪存储方案： ( 1 )运用图像编码方案，存储了具有隐藏信息的编码黑白二值图像； ( 2 )运用旋转复用方案，在同一存储点用不同方向的参考光存储了多幅图像； ( 3 )运用空间复用技术，在一定区域内紧靠着记录一系列特定图像的傅里叶全息图。 - In chapter three , the importance of maintaining the equal optical path between measuring beam and reference beam in measuring horizontal and vertical vibration table are analyzed , and the factors having effect on contrast degree of interference fringe are introduced . for improving the accuracy of laser - vibration - measuring - system , the phase - modulation - multi - period - average method and the vibration isolated of system are analyzed
第三章分析了光路设计中的等光程问题的重要性，以及影响干涉条纹对比度的相关因素；并从提高测量精度的角度分析了调相多周期平均法和系统的隔振。